Oven & Range Repair in Los Angeles, CA | SteelPeak

Oven & Range Repair in Los Angeles

Oven & range repair for gas and electric models, from ovens that won't heat to burners that won't light. Licensed & insured, with an upfront quote before any repair work begins.

21 Google reviews · Same-day appointments may be available · Licensed & insured · Upfront pricing — no hidden fees

Diagnostic visit: $89 standard residential · $129 built-in or commercial

“Good company. I would use them again without hesitation. Fair prices for the quality of work and reliable.”

— gerald g. · ★★★★★ Google review

Need oven, range or stove repair near you? SteelPeak Appliance Repair fixes gas, electric and dual-fuel ranges, stoves and wall ovens across Los Angeles, the San Fernando Valley and the Santa Clarita Valley.

The cooktop and the oven run on separate parts, so a range can lose its burners or its oven while the other half still works.

COMMON PROBLEMS

What your oven or range is telling you

What fails, and what to check first.

Oven won't heat or reach temperature.

Electric: a broken or blistered bake element, the temperature sensor, a control relay, or a 240-volt supply that has lost one side. Gas: an igniter that glows but is too weak to open the gas valve, or the valve.

Check first: on electric, with the breaker off and the oven cool, look for a break in an exposed bake element; on gas, check the range's breaker, since the igniter needs power.

Oven not heating →

Burners click but won't light.

Damp or misaligned caps, clogged burner ports, a cracked igniter or a weak spark module. A burner that keeps clicking once lit points to a wet switch or, on ranges that relight on their own, a wet electrode or an off-center cap. On a separate cooktop, see cooktop repair.

Check first: with the knobs and the range's breaker off and the burners cool, let a damp burner dry and reseat the cap flat.

Burners won't ignite →

Burned on one side, pale on the other.

A stopped convection fan, a failed element, a leaking gasket or a sensor that reads wrong; a dark pan or a crowded rack can do it too.

Check first: bake with one light-colored pan on the middle rack and see whether it still browns unevenly.

Uneven heating or hot spots →

The door won't close or seal.

Worn hinges or springs, a torn gasket or a rack off its rails; the gap lets heat out and the front gets hot.

Oven door won't close properly →

Self-clean won't start, or the door stays locked.

The door lock motor or switch, a sensor or the control. Self-clean runs hot and can open a thermal fuse, leaving the oven dead or locked.

Self-cleaning not working →

Recognize one of these?Call (661) 465-3676Book online
PRICING

What oven and range repair costs

  • Diagnostic visit: $89 for a standard residential oven or range, freestanding and pro-style ranges included, even on a premium brand; $129 for a built-in or commercial unit. For a wall oven, tell us the model and we'll confirm which fee it is.
  • What the technician checks: Temperature against the setting, the igniter or elements, the sensor, each burner's spark and flame, and the door.

Thermador range or wall oven? Thermador range, oven & cooktop repair → · Not sure if yours is built-in? Built-in appliance repair →

BRANDS WE REPAIR

Oven & Range Brands We Service

What to know by brand.

  • Pro-style ranges. Wolf burners carry two flames each, Viking adds a VariSimmer setting, and Thermador Star Burners relight on their own.
  • Whirlpool family. Whirlpool, KitchenAid, Maytag and Jenn-Air share many designs; on KitchenAid Even-Heat true convection ovens, uneven baking points to the third element behind the fan, the fan or the sensor.
  • GE family. GE, Café and Monogram come from GE Appliances; on GE ranges and wall ovens, F3 or F4 points to the oven temperature sensor circuit.
  • Samsung and Frigidaire. On Samsung ranges, an SE code means a touch key is stuck or shorted; freestanding Frigidaire ranges have lift-off doors with hinge locks, so a crooked door after cleaning may only need reseating.

Managing rentals or a building? Property management service →

HOW IT WORKS

What happens after you call

  1. Tell us what's going on. Call, or book online anytime and pick an arrival window; the model label is behind the drawer or on the oven door frame.
  2. Diagnostic visit. A technician tests the oven and burners or elements and finds the cause.
  3. Upfront quote. You hear what failed, your options and the price before any repair work begins. Repair or not, it's your decision.
  4. Repair. If the repair needs a second visit, we schedule it with you.

SteelPeak Appliance Repair is licensed & insured.

Oven acting up?

Book online anytime, or call and tell us what it's doing.

21 Google reviews · Same-day appointments may be available · Licensed & insured · Upfront pricing — no hidden fees

FAQ

Frequently Asked Questions

The diagnostic visit is $89 for a standard residential oven or range, freestanding and pro-style ranges included, and $129 for a built-in or commercial unit. The repair price comes before any work.
REQUEST A CALL

Prefer a call back?

Leave your name, number and what the oven or range is doing, and we'll call you back.

We call you back during business hours

Contact page · Call (661) 465-3676

Ready to Get Your Oven & Range Fixed?

Book online for the fastest scheduling, or call to talk it through.

21 Google reviews · Same-day appointments may be available · Licensed & insured · Upfront pricing — no hidden fees